Quick Detail

Application: chemical electronic aerospace metallurgy medicine

Width: 500-3000mm

Length: 3000~10000mm

Technique: Cold Rolled

Grade: GR5

Ti (Min): 99.99%

Brand Name:Baoti

Model Number:GR1,GR2,GR7,GR9,GR12

Processing Service:Bending, Welding, Decoiling, Cutting, Punching

Product Name:Titanium Alloy Sheet/Plate

Shape:alloy strip, sheet, and plate

Material:Titanium 6AL4V

Finish:Unpolished (Mill)

Notes:Actual dimensions are oversized to allow finishing to listed size

Titanium plate

Grade: GR1, GR2, GR5, GR7, GR12

BT1-0, BT1-00, BT6

TP270, TP340, TP340PB, TAP6400

TA1, TA2, TC4, TA9, TA10

Specification:

T 0.5-1.0mm x W1000mm x L 2000-3500mm

T 1.0-5.0mm x W1000-1500mm x L 2000-3500mm

T 5.0- 30mm x W1000-2500mm x L 3000-6000mm

T 30- 80mm x W1000mm x L 2000mm

State: Hot Working ( R ) Cold Working ( Y ) Annealing ( M )

Process: hot forging, hot rolling, cold rolling, annealing, pickling

Applications: metallurgy, electronics, medical, chemical, petroleum, pharmaceutical, aerospace, etc.

Standard: ASTM B265, ASTM F67/F136

ASTM B265 titanium and titanium alloy sheet

ASTM B265 covers annealed titanium and titanium alloy strip, sheet, and plate. ASTM B265 Ti and Ti-based alloy plates are widely used in the equipment for high-temperature environment, including aircraft equipment, petroleum and petrochemical, biomaterial, ocean and chemical industry, for example: blade, storage tank, target, tube and heat-exchanger equipment.

Size:

Thickness:5~100mm, Width:1200~2500mm, length:3000~10000mm

Appliation:Used in: aerospace, military advisor, industrial processes, automotive, agri-food, medicine, etc.

Unalloyed Titanium grades:

Grade 1,Grade 2,Grade 3,Grade 7,Grade 11 (CP Ti-0.15Pd),Grade 16,Grade 17,Grade 26,Grade 27

Titanium Based Alloys grades:

Grade 5(Ti-6Al-4V),Grade 9 ( Ti 3Al-2.5V),Grade 12 (Ti-0.3-Mo-0.8Ni),Grade 19 (Ti Beta C),Grade 23 (Ti 6Al-4V ELI),Grade 28

Grades of supply:Gr1 ,Gr2 ,Gr5,Gr12

ASTM B265 Commonly used grades Chemical Composition:

Grades	C max	O max	H max	Fe max	Al	V
Grade1	0.08	0.18	0.015	0.20	/	/
Grade2	0.08	0.25	0.015	0.30	/	/
Grade5	0.08	0.20	0.015	0.40	5.50~ 6.75	3.50~ 4.50
Grade 12	0.08	0.25	0.015	0.30	/	/

ASTM B265 Commonly used grades Mechanical Properties (%):

Grades	Yield Point Mpa (N/mm2)	Tensile Strength Mpa (N/mm2)	Elongation% min
Grade1	138~ 310	242	24
Grade2	276~ 448	345	20
Grade5	828	897	10
Grade 12	345	483	18

Titanium plate/sheet

manufacturing process

Forging: forging process the metal recrystallization temperature or higher performed. Hot rolling: In the above recrystallization temperatures at rolling process. Cold-rolled: plastic deformation temperature is below the recovery temperature of the rolling process. Annealing: The metal was slowly heated to a certain temperature, maintaining a sufficient time, and then cooling at an appropriate rate (usually slow cooling, and sometimes controlled cooling) the heat treatment process of a metal. Pickling: The article is immersed in an aqueous solution of sulfuric acid to remove oxides and other metal surface of the film. Pre-treatment process or intermediate plating, enamel, rolling and other processes.

http://www.flyingti.com/