Introduction of mill finish aluminum sheet:
Mill finish aluminum sheet is mainly includes 1xxx, 3xxx, 5xxx, 6xxx, 8xxx aluminum alloy. Customized service is available to alloy, temper/hardness, thickness, width, length, pack weight etc. Mill finish aluminum sheet with very good corrosion resistance and moderate strength. Excellent weldability, formability, and good machinability make aluminum sheet popular and economical choice in building, construction, decoration, industry, parts processing and other fields. Mill finish aluminum sheet are widely used to roofing, household appliances, cooking utensils, base plate, heat insulation, furniture components, oil tanks, curtain wall, ceiling fans, fan blades, caps for cosmetic jars, transformer winding, radiator, cutting, LED lights, mould making, panel, boat, airplane, solar, building materials, building facade, packing etc.
Chemical Properties of different alloy | ||||||||
Alloy |
Si |
Fe |
Cu |
Mn |
Mg |
Zn |
Ti |
Al |
1060 |
0.2 |
0.25 |
0.05 |
0.03 |
0.03 |
0.05 |
0.015-0.02 |
R |
1050 |
0.25 |
0.4 |
0.05 |
0.05 |
0.05 |
0.05 |
0.015-0.02 |
R |
1100 |
0.2 |
0.5-0.6 |
0.05 |
0.05 |
- |
0.05 |
0.015-0.02 |
R |
3003 |
0.2 |
0.3-0.45 |
0.05-0.15 |
1.05-1.35 |
- |
0.1 |
- |
R |
5052 |
0.088 |
0.296 |
0.007 |
0.038 |
2.253 |
0.009 |
0.012 |
R |
5083 |
</=0.4 |
0.4 |
</=0.1 |
0.4-1.0 |
4.0-4.9 |
0.25 |
</=0.15 |
R |
5754 |
0.07 |
0.3 |
0.006 |
0.18 |
- |
- |
0.016 |
R |
6061 |
0.4-0.8 |
0.7 |
0.15-0.4 |
0.15 |
0.8-1.2 |
0.25 |
0.15 |
R |
6082 |
0.8-1.5 |
0.5 |
0.1 |
0.4-1.0 |
0.6-1.2 |
0.2 |
0.1 |
R |
8011 |
0.55-0.59 |
0.69-0.75 |
0.02 |
0.025 |
0.01 |
0.01 |
0.015-0.02 |
R |
Packaging Show:
1: Film or paper interleaved to protect the sheet’s surface without the scratches.
2: Fumigated wooden pallets with waterproof paper and brown paper,
3: Desiccation as required and plastic coverage,
4: Plywood on the bottom and top of pallets,
5: Hard board on the anodized steel fasten point,
6 : Or can be customized as buyers’ requirements.
Delivery Time: 15-35 days after receiving LC or deposit 30%
Kindly notes:
The volume for 20FT container is L*W*H = 5.85M*2.35M*2.35M 27Tons G.W. Max can be loaded
The volume for 40FT container is L*W*H = 11.85M*2.35M*2.35M 27Tons G.W. Max can be loaded
The best way of loading container will provide to you.
http://www.xiangxin-alu.com/