Survey

Based one the technique of getting heat from combustion by heating coolant water,liquid parking heater employ a kind of heater device by using electrical boxes to supply electricity and vehicle oil as the fuel to heat the bus engine and the whole vehicle's water circulation systems to get the circulation heating.

Advantage

The  liquid parking heaters retain the function of manual starting,timer  starting,starting by the remote control and distant starting by mobile phone  and can be applied to various heating demands.By filling proper fuel,the  heaters can operate steadily at temperatures above -40℃.

Techinal Information

Working Principles of Liquid  Parking Heater
The liquid  parking heater need to additional outer linking current and heat the vehicle  without starting the engine.They have independent water pumps,oil pumps and  series connected between the engine and blower water tank of the vehicle and  get electricity from its own battery of the vehicle.The oil pump is controlled  by the computer and a little oil is taken from the oil tank of the vehicle and  then the oil is forward to the combustion chamber to be fired by the glow plug  with the atomization techinque.Then by the heat exchange system of the  heater,antifrezze liquid is heated to supply circulational heat to the  engine.The temperature of the motor and the blower of the vehicle gradually  rise.When the water temperature rise to 65℃,the blower automatically opens and provides heat with the driver’s cabin.When the water temperature rise to 75℃,the heater automatically stops.Then it will be shown on the remote  control that the heating process has been completed.This type of the heater can  be used together with its own equipped heating equipment of the vehicle and  there will be no conflict.

Installation and precautions
(1)Angle and  Range of the Installation of the Liquid parking Heaters
(2)Concerning the  process of the installation of the water inlet and outlet pipe of the water pump of the liquid parking heater,please ensure that the installation direction  of the heater’s water pipe should be  the same as the water flowing direction of the original water pump of the vehicle.The water flowing direction should get in from the lower position and  get our from the upper position.The water pump should be installed at the  lowest position of the vehicle’s chassis.
(3)The  installation of Combustion Air Inlet Duct
(4)The  Installation of the Exhaust Device of the Heater.
(5)The  Installation of the Dose Oil Pump and Warnings.
(6)The  Installation of Oil intake Device and Precautions.
(7)The  Installation of Heater Harness and Precautions.
(8)Accommodation  and Test of the Heater after Installation.

If you're looking for the e-mark 12kw diesel water liquid parking heater for cars, welcome to wholesale the product from our factory. As one of the leading manufacturers and suppliers in China, we will offer you the best service and fast delivery. Now, check the quotation with our seller.