● General Description:
ALTEK's SFP Compact BiDi SFP Transceivers are designed to support network systems deploying single-fiber bidirectional transceivers in high density applications. These transceivers enable network system managers to increase port density and data throughput, while reducing network equipment costs. The CSFP Compact BiDi SFP Transceivers supports link lengths of 20km and 40km.
● Quick Details:
► Hot swappable to maximize uptime and simplify serviceability;
► Robust design for enhanced reliability;
► Supports digital optical monitoring (DOM) capability;
► 1310nm DFB transmitter, PIN photo-detector;
► Operating case temperature: 0℃ to 70℃;
► Low power consumption;
► Applicable for 10km SMF connection;
► All-metal housing for superior EMI performance;
► Advanced firmware allow customer system encryption information to be stored in transceiver;
► Cost effective SFP+ solution, enables higher port densities and greater bandwidth 550-Meter.
● Application:
► 10GBASE-LR at 10.3125Gbps;
► 10GBASE-LW at 9.953Gbps;
► Other optical links.
● Description:
Form Factor | SFP |
Compatibility |
Cisco Compatible |
Distance |
10km |
Max Data Rate |
1000Mbps |
Wavelength |
1550nm-TX |
Max Cable Distance |
10km over OM2 MMF |
Interface |
LC Simplex |
Verification Optical Components |
WDM BiDi |
DOM Support |
Yes |
Cable Type |
SMF |
TX Power |
-9.5 ~ - 3dBm |
Receiver Sensitivity |
< -24dBm |
HS Code |
Optical fiber cables-85447000.00 |
● Optical characteristics transceiver:
Parameters | Symbols |
Min |
Typ |
Max |
Unit |
40km | |||||
Centre Wavelength BXD |
λC |
1320 |
1330 |
1340 |
nm |
Centre Wavelength BXU |
λC |
1260 |
1270 |
1280 |
nm |
Spectral Width (RMS) |
σ |
|
|
1 |
nm |
Average Output Power |
P0ut |
-3 |
|
+2 |
dBm |
Extinction Ratio |
EX |
3.5 |
6 |
|
dB |
● Mechanical:
● Optical characteristics receiver:
Parameters | Symbols |
Min |
Typ |
Max |
Unit |
20km | |||||
Centre Wavelength BXD |
λC |
1260 |
1270 |
1280 |
nm |
Centre Wavelength BXU |
λC |
1320 |
1330 |
1340 |
nm |
Reveiver Sensitivity |
Sen |
-14.5 |
|
|
dBm |
Maximum input |
Pmax |
0 |
|
|
dBm |
LOS De-Assert |
LOSd |
|
|
-14 |
dBm |
LOS Assert |
LOSa |
-25 |
|
|
dBm |
LOS Hysteresis |
LOSh |
0.5 |
|
4 |
dBm |
40km | |||||
Centre Wavelength BXD |
λC |
1260 |
1270 |
1280 |
nm |
Centre Wavelength BXU |
λC |
1320 |
1330 |
1340 |
nm |
Reveiver Sensitivity |
Sen |
-16 |
|
|
dBm |
Maximum input |
Pmax |
0 |
|
|
dBm |
LOS De-Assert |
LOSd |
|
|
-17 |
dBm |
LOS Assert |
LOSa |
-27 |
|
|
dBm |
LOS Hysteresis |
LOSh |
0.5 |
|
4 |
dBm |
60km | |||||
Centre Wavelength BXD |
λC |
1260 |
1270 |
1280 |
nm |
Centre Wavelength BXU |
λC |
1320 |
1330 |
1340 |
nm |
Reveiver Sensitivity |
Sen |
-22 |
|
|
dBm |
Maximum input |
Pmax |
-7 |
|
|
dBm |
LOS De-Assert |
LOSd |
|
|
-23 |
dBm |
LOS Assert |
LOSa |
-33 |
|
|
dBm |
LOS Hysteresis |
LOSh |
0.5 |
|
4 |
dBm |
80km | |||||
Centre Wavelength BXD |
λC |
1480 |
1490 |
1500 |
nm |
Centre Wavelength BXU |
λC |
1530 |
1570 |
1580 |
nm |
Reveiver Sensitivity |
Sen |
-22 |
|
-7 |
dBm |
Maximum input |
Pmax |
-7 |
|
|
dBm |
LOS De-Assert |
LOSd |
|
|
-24 |
dBm |
LOS Assert |
LOSa |
-34 |
|
|
dBm |
LOS Hysteresis |
LOSh |
0.5 |
|
|
dBm |
Dispersion penalty |
|
|
|
3.0 |
dBm |
● Electrical characteristics:
Parameters | Symbols |
Min |
Typ |
Max |
Unit |
Remarks |
Supply Voltage |
Vcc |
3.14 |
3.3 |
3.46 |
V |
|
Supply Current 20km |
Icc |
|
270 |
350 |
mA |
|
Supply Current 40km |
|
|
300 |
450 |
mA |
|
Supply Current 60km |
|
|
300 |
450 |
mA |
|
Supply Current 80km |
|
|
|
500 |
mA |
|
| ||||||
Supply Voltage |
Vcc |
3.14 |
3.3 |
3.46 |
V |
|
Supply Current |
Icc |
|
|
300 |
mA |
|
Reference Differential Input |
Zd |
|
100 |
|
mA |
|
Input AC Common Mode Input |
|
0 |
25 |
|
mA |
|
Differential Input Voltage Swing |
VID |
150 |
|
900 |
mA |
|
Total Jitter |
|
|
|
|
|
|
Data Dependant Jitter |
|
|
|
|
|
|
Uncorrelated Jitter |
|
|
|
|
|
|
Eye Mask |
See SFP+ MSA |
X1 |
|
|
|
UI |
Eye Mask |
See SFP+ MSA |
X2 |
|
|
0.35 |
UI |
● Quality Certification:
Quality and standards are the foundation of ALTEK. We are dedicated to providing customers with outstanding, standards-compliant products and services. ALTEK has passed many quality system Certifications, like CE, RoHS, FCC, established an internationally standardized quality assurance system and strictly implemented standardized management and control in the course of design, development, production, installation and service. Please Note: Installing a third party transceiver does not void your network equipment warranty. Network equipment manufacturers all have guidelines stating that warranty support on their products will not be affected.
● Lifetime Warranty:
All the fiber optic products in ALTEK are fully warranted against defects in material and workmanship with a lifetime guarantee. This warranty does not cover damage caused by accident, improper care, improper use, negligence, normal wear and tear, or the natural breakdown of colors and materials over extended time and use.