Original
By certification 
XKHF-2 Rapid Ash Detector
Muffle Furnace
Product Name: Rapid ash detector
Product Type: XKHF-2
Product Overview:
XKHF-2 Rapid ash detector is a new determination of the ash content of the special equipment. The equipment is fast. accurate. efficient. energy-saving advantages. widely used in laboratory coal. geology. metallurgy. chemical industry. trade and other sectors.
Features:
1. The instrument is a new type of coal or other combustible material measured ash content of special equipment.
2. The sample will be tested on the transmission chain. with the chain into the hot combustion zone. and then send the furnace.
3. The sample is slowly into the hot zone. to avoid the detonation of the sample.
4. The conveyor chain speed is infinitely adjustable. ashing time can be changed according to the requirements of the sample.
5. The furnace as silicon carbide heating elements branded nickel resistance wire. around the hearth with silicate cotton insulation infill.
6. Insulating layer of air between the shell and insulation material left. only increasing the insulation effect. but also make appearance. the use of safety.
7. Better than the national standard GB / T212-2008 standard "approach industrial analysis of coal."
Technical parameters:
Furnace length: 730mm
Thermostat band length: (815 ± 10 ℃) ≥150mm. temperature difference ≤ ± 10 ℃
Maximum temperature: 900 ℃
Warm-up time:(From room temperature to 815 ℃)45min
Power: AC220 (± 10%) V. 50Hz
Maximum power: 4KW
Chain speed: 15 ～ 70mm / min (ashing time 15 ～ 50min)
Sample amount: 0.5 ± 0.01g. accurate to 0.0002g
Accuracy: better than GB / T212-2008 standard "method of coal industry analysis"
Muffle Furnace
Product Name: Rapid ash detector
Product Type: XKHF-2
Product Overview:
XKHF-2 Rapid ash detector is a new determination of the ash content of the special equipment. The equipment is fast. accurate. efficient. energy-saving advantages. widely used in laboratory coal. geology. metallurgy. chemical industry. trade and other sectors.
Features:
1. The instrument is a new type of coal or other combustible material measured ash content of special equipment.
2. The sample will be tested on the transmission chain. with the chain into the hot combustion zone. and then send the furnace.
3. The sample is slowly into the hot zone. to avoid the detonation of the sample.
4. The conveyor chain speed is infinitely adjustable. ashing time can be changed according to the requirements of the sample.
5. The furnace as silicon carbide heating elements branded nickel resistance wire. around the hearth with silicate cotton insulation infill.
6. Insulating layer of air between the shell and insulation material left. only increasing the insulation effect. but also make appearance. the use of safety.
7. Better than the national standard GB / T212-2008 standard "approach industrial analysis of coal."
Technical parameters:
Furnace length: 730mm
Thermostat band length: (815 ± 10 ℃) ≥150mm. temperature difference ≤ ± 10 ℃
Maximum temperature: 900 ℃
Warm-up time:(From room temperature to 815 ℃)45min
Power: AC220 (± 10%) V. 50Hz
Maximum power: 4KW
Chain speed: 15 ～ 70mm / min (ashing time 15 ～ 50min)
Sample amount: 0.5 ± 0.01g. accurate to 0.0002g
Accuracy: better than GB / T212-2008 standard "method of coal industry analysis"
