● General Description:
Every transceiver is individually tested on corresponding equipment such as Cisco, Arista, Juniper, Dell, Brocade and other brands, passed the monitoring of ALTEK's intelligent quality control system.
● Direct Connection for 100GBASE-SR4 Transceiver:
Item No. |
ID# |
Description |
① |
48354 |
QSFP28 Cisco QSFP-100G-SR4-S Compatible 100GBASE-SR4 850nm 100m Transceiver |
② |
41042 |
1M MTP 10G OM3 50/125 Multimode Fiber Optic Trunk Cable, 12 Fiber, Polarity B, Female-Female, LSZH-Aqua, Bunch, 40GBASE-SR4 Interconnect Solution |
③ |
48354 |
QSFP28 Cisco QSFP-100G-SR4-S Compatible 100GBASE-SR4 850nm 100m Transceiver |
④ |
43514 |
One-Click Cleaner for MTP/MPO Connector (600 cleans) |
● Application:
● Description:
Cisco Genuine | QSFP28-SR4-100G |
Form Type |
QSFP28 |
Max Data Rate |
103.1Gbps |
Wavelength |
850nm |
Max Cable Distance |
100m |
Interface |
MTP/MPO-12 |
Optical Components |
4x VCSEL |
Cable Type |
MMF |
DOM Support |
Yes |
TX Power |
-5.6~3dBm |
Receiver Sensitivity |
<-5.4dBm |
HTS-Harmonized Code |
8517706000 |
● Optical characteristics transceiver:
Parameter | Symbol |
Min |
Typ |
Max |
Unit |
|
Maximum Launch Power |
PMAX |
-3 |
+0.5 |
dBm |
||
Optical Center Wavelength |
UBXFP-20-U |
λ |
1260 |
1270 |
1280 |
nm |
UBXFP-20-D |
1320 |
1330 |
1340 |
|||
Optical Extinction Ratio |
ER |
3.5 |
dB |
|||
Spectral Width |
Δλ |
1 |
nm |
|||
Sidemode Supression ratio |
SSRmin |
30 |
dB |
|||
Rise/Fall Time (20%~80%) |
Tr/Tf |
50 |
ps |
|||
Optical Eye Mask |
IEEE802.3ae |
|||||
Operating Date Rate |
BR |
9.95 |
11.3 |
Gb/s |
||
Receiver Sensitivity |
Sen |
-14.5 |
dBm |
|||
Maximum Input Power |
PMAX |
0 |
dBm |
|||
Optical Center Wavelength |
UBXFP-20-U |
λC |
1320 |
1330 |
1340 |
nm |
UBXFP-20-D |
1260 |
1270 |
1280 |
|||
Receiver Reflectance |
Rrx |
-14 |
dB |
|||
LOS De-Assert |
LOSD |
-15 |
dBm |
|||
LOS Assert |
LOSA |
-30 |
dBm |
|||
LOS Hysteresis |
LOSH |
0.5 |
5 |
dB |
● A Cost-Effective Cabling Scenario Instance:
● Connection for Cisco 100G QSFP28 SR4 Transceivers with Rackmount Fiber Enclosure:
When interconnect Cisco 100G QSFP28 SR4 Optics transceivers for your ultra high speed networks in data center, the use of MTP MMF cabling is generally the preferred cabling method. Below interconnection in figure 2, rackmount fiber enclosures are used to complete the interconnection.
● Lifetime Warranty:
All the fiber optic products in ALTEK are fully warranted against defects in material and workmanship with a lifetime guarantee. This warranty does not cover damage caused by accident, improper care, improper use, negligence, normal wear and tear, or the natural breakdown of colors and materials over extended time and use.